What Size Extension Cord Do I Need? Gauge Chart and Calculator

Not sure if this category is right for you? Take the tool finder quiz →

This post contains affiliate links. We earn a commission when you purchase through our links at no extra cost to you.

Researched by Moses Washika · Updated November 2026

What to know
  • Match the cord to the amps on the tool label and the length you need. Longer runs need thicker wire.
  • For most tools up to 50 feet, a 14 gauge cord handles up to 15 amps. For 100 feet, step up to 12 gauge for saws and other 15 amp tools.
  • A lower gauge number means thicker wire: 10 gauge is heavier duty than 16 gauge.
  • Never run a space heater on an extension cord, and never chain cords together.

The wrong extension cord makes tools run hot and slow, trips breakers and can start a fire. The right one is easy to pick once you know two numbers: the amps your tool draws and the length you need.

This guide explains extension cord gauges, gives a sizing chart, and includes a calculator for your tool and cord length. It also covers outdoor ratings, holiday lights and generators.

Extension cord size calculator

Extension cord size calculator

Pick what you are plugging in and how far it is from the outlet. We show the gauge to buy and how much voltage you lose on the way.

Gauge suggestions follow the Lowe’s extension cord gauge guide for 25 to 100 feet and step up one size for 150 feet. Voltage drop uses standard copper wire resistance at 120 volts.

Extension cord gauge chart

Load25 feet50 feet100 feet150 feet
Up to 10 amps (about 1,200 W)16 gauge16 gauge16 gauge14 gauge
10 to 12 amps (about 1,440 W)16 gauge16 gauge14 gauge12 gauge
12 to 13 amps (about 1,560 W)14 gauge14 gauge14 gauge12 gauge
13 to 15 amps (about 1,800 W)14 gauge14 gauge12 gauge10 gauge
15 to 20 amps10 gauge10 gauge10 gauge10 gauge

Based on the Lowe’s extension cord gauge guide. Always check the amp rating printed on the cord itself, and when in doubt, go one size thicker.

For motors that start under heavy load, such as saws, compressors and chainsaws, one gauge thicker than the chart is a sensible margin. It keeps the motor cooler and reduces voltage drop.

What extension cord gauge means

Gauge (AWG) is the thickness of the copper wire inside the cord. The lower the number, the thicker the wire and the more current it can carry safely.

GaugeDutyTypical uses
16 AWGLight to mediumLights, fans, chargers, hedge trimmers, small drills
14 AWGMediumMowers, blowers, shop vacs, most power tools up to 50 feet
12 AWGHeavySaws, pressure washers and 15 amp tools on long runs
10 AWGExtra heavyGenerators, air compressors and 20 to 30 amp loads

Thin wire has more resistance. Over a long cord, that resistance turns into heat and a drop in voltage, which makes motors work harder.

How to find your tool’s amps

  • Check the label. Most corded tools print the amps on the nameplate or in the manual.
  • Convert watts. If the label shows watts, divide by 120 for US household current. A 1,500 watt tool draws about 12.5 amps.
  • Add up several devices. If you plug a power strip or several light strings into one cord, add their amps together.

Reading the cord jacket

The letters on the cord jacket tell you where it can be used. Look for them before you buy.

LetterMeaning
SService grade, for general use
JJunior service, rated to 300 volts. Most household and job site cords
TThermoplastic jacket
EElastomer jacket, stays flexible in the cold
OOil resistant
WRated for outdoor use

An SJTW cord is a common outdoor cord. For winter work, an SJEOW cord stays flexible in freezing weather.

The right extension cord for common jobs

JobTypical loadCord to buy
Christmas lightsUnder 1 amp for LED strings16 gauge outdoor cord. See tools for hanging Christmas lights
Leaf blower or electric mowerAbout 12 amps14 gauge outdoor cord up to 100 feet
Shop vacAbout 10 amps14 gauge for 50 to 100 feet. See what size shop vac you need
Electric pressure washerAbout 13 ampsUse the shortest cord you can, 12 gauge, and a GFCI outlet. See what PSI pressure washer you need
Circular, miter or table sawAbout 15 amps12 gauge, or 10 gauge beyond 100 feet
Portable generatorUp to 30 ampsA 10 gauge generator cord matched to the outlet. See the best generator extension cords

Running appliances from a generator during an outage? Size the generator first with what size generator do I need, then match the cord to each load.

Extension cord safety rules

The Electrical Safety Foundation estimates that about 3,300 home fires start in extension cords each year, killing about 50 people and injuring about 270 (ESFI).

  • Never plug a space heater into an extension cord. Plug it straight into the wall.
  • Do not chain cords together. Buy one cord that is long enough.
  • Use outdoor rated cords outside and plug them into a GFCI outlet.
  • Do not run cords under rugs or through doorways, where they get crushed and cannot shed heat.
  • Unplug a cord that feels warm and replace any cord with cracked insulation or a missing ground pin.
  • Use cords for temporary jobs. If you rely on one every day, have an outlet installed instead.
  • Buy listed cords. Look for a UL, ETL or CSA mark on the cord.

What to buy

Most homes do well with two cords: a 50 foot 14 gauge outdoor cord for yard tools and lights, and a 50 foot 12 gauge cord for saws and the pressure washer. Add a 10 gauge generator cord if you keep a generator for outages.

See 14 gauge outdoor cords on Amazon

See 12 gauge heavy duty cords on Amazon

See cord reels on Amazon

A lighted end, which glows when the cord has power, makes troubleshooting easy on a job site. Cold climates are worth an SJEOW cord that stays flexible below freezing.

Prefer a dedicated tool? Try our extension cord gauge calculator. Running a generator? Size it first with the generator wattage calculator.

Frequently asked questions

What size extension cord do I need for 15 amps?

For a 15 amp tool, use a 14 gauge cord up to 50 feet and a 12 gauge cord at 100 feet. Go one size thicker for very long runs or motors that start under load.

Is 12 gauge or 14 gauge better?

12 gauge is thicker and carries more current over longer distances. 14 gauge is lighter and cheaper and handles most tools up to about 50 feet.

Can I use a 16 gauge extension cord for a power tool?

Yes, for light tools under about 10 to 12 amps on a short cord. For saws, pressure washers and long runs, use 14 or 12 gauge.

Can I plug a space heater into an extension cord?

No. Heater makers and fire safety groups say to plug space heaters directly into a wall outlet, because the long, heavy load can overheat a cord.

Does a longer extension cord reduce power?

Yes. Longer cords have more resistance, which causes voltage drop. Using a thicker gauge keeps the drop low.

What does SJTW mean on an extension cord?

SJTW means a junior service cord with a thermoplastic jacket, rated for outdoor use. It is a common choice for yard and job site work.

Similar Posts